For more information: triplek@gondtc.com

Go to the following address in your internet browser: http://69.178.213.246/ Once there – you will see a screen like this: Click on Mpeg4 Encoder Viewer and click the Go button (bottom left) – you will then see the following screen: If you have a high speed internet connection – click on DSL/CABLE/T-1 and also on Multi View. Leave the default 1024 x 768 resolution as is. If your settings in your windows control panel are set to less than 1024 x 768 resolution – you will get an error message saying that you must have at least 1024 x 768. Therefore you will need to go to Start – Control Panel – and click on Display. Go to the Settings tab and change the resolution to 1024 x 768 and click on apply. Then you will get a screen that looks like this: Once the blue bar finishes executing – you will see this screen: Type in the User Name which is triplek Type in the Password which is buckskin Click OK You will now be able to see the cams – the default view of 4 cams comes up – but if you click on the box with the 16 cams (bottom left) you will then have all 16 cams up. Keep in mind that not all cams are on at all times – but during foaling season most of the cams will be on. Thanks for helping watch – this is always an exciting time of year for us. If you see a mare that appears to be in trouble – please call (701)547-3515. We will probably be right there watching from the aisle – but appreciate calls just in case!!!